Heat recovery steam generators and economisers capturing exhaust energy from engines, turbines, furnaces and incinerators.
Supported Brands
Commercial
Industrial
Our Service
Troubleshooting Guide
Tap a fault for likely causes, what to check on site, and when to call us out.
Likely causes
What to check
Compare exhaust inlet and outlet temperatures with commissioning data — a narrowing gap means poor transfer.
When to call us
When cleaning intervals stretch beyond schedule or output drops more than 10%.
Likely causes
What to check
Measure back pressure at the engine or turbine outlet against the manufacturer limit.
When to call us
Immediately — excess back pressure damages the engine or turbine and can void warranty.
Likely causes
What to check
Watch for unexplained make-up water use and steam quality problems downstream.
When to call us
At the first sign of leakage — a failed tube can flood the exhaust path.
FAQ
It depends on exhaust temperature, run hours and the steam value it displaces. On continuously running gas engines, a well-designed recovery boiler often pays back within 2–4 years. We quantify this from your actual load logs.
Frequently yes, provided the exhaust temperature and back pressure allowance suit it. We survey the exhaust route and prime mover limits before design.
Clean-burning gas engines may go 12 months; diesel, biomass and furnace off-gas applications often need quarterly cleaning driven by measured performance rather than the calendar.
Service Areas
Waste heat boiler repair and maintenance in your area. Tap a suburb for local service details.
+ 87 more areas serviced
Send nameplate photos and we quote within 24 hours.
Get a Free QuoteCall 067 603 9306Related